ZBL funnel injection pump - injection pump-ZBL50 funnel funnel cutting coal injection pump with 
 Sales Hotline :0537 -2,383,936 15,269,750,901 Hui Cheng QQ: 1172792005 Fax :0537 -2,359,798 
 Model ZBL50/4-7.5 (DLB-50/40) funnel-type injection pump 
 Basic parameters Parameter Name Units 
 Rated flow L / min 50 (60) 
 Rated working pressure Mpa 4 
 Plasma cylinder by mm 105 
 Stroke length mm 75 
 Reciprocating frequency min-1 81 
 Gas pressure mpa 
 Adjust air pressure mpa 
 Cylinder Diameter mm 
 Straight through the ventilation 
 Air consumption m3/min 
 Motor Power KW 7.5 
 Matching motor model YBK2-160M-6 
 Weight KG 400 
 Dimensions (L × W × H) mm 2000 × 600 × 900 
 Diameter mm 26 plasma row 
 ZBL-50/4-7.5 coal injection pump with a funnel material (original DLB-50/40 funnel injection pump) ZBL-type funnel for mining building materials injection pump wells, surface and underground water shut-off, high pressure injection concentration of cement slurry. Grouting can also be used for coal or other non-corrosive media, pressure injection of coal mine gas drainage hole sealing and grouting. As the funnel performance and self-absorption material with a certain flexibility in the use of rubber ball, so you can note the concentration of large or with a slurry of particles. 
 First, the characteristics: 
 1.ZBL funnel-type material under the injection pump 
 1) As a result of funnel feeding, performance self-priming pump, to inject a large concentration of the slurry. 
 2) The pump discharge into the core plasma cutting using cutting rubber ball, so to inject the slurry containing solid particles. 
 3) After grouting plunger exterior surface has a certain hardness and wear resistance, good performance, long life. 
 Second, the principle 
 1, ZBL-type funnel grouting system 
 Motor will be powered by V-belt, pulley, gear box, helical gear shaft, gear, connecting rod, wheel, the rotary motion into reciprocating linear motion to drive the rod, the plunger for reciprocating movement to complete the slurry suction action. 
 Third, the Order details 
 1, ZBL funnel-type injection pump 
 1) selection of the note when the note contained in the slurry of solid particles no larger than 3 ~ 4mm 
 2) on the ground without proof of the required environmental conditions, with no anti-slip when the motor, when ordering instructions. 
 3) products supporting the motor voltage is 380/660v. For with 660/1140v time, the instructions when ordering.