Two-fluid injection pump - Air injection pump-ZBQ-50 / 6 pneumatic air injection pump injection pump -QZB-50/6Q 
 Sales Hotline :0537 -2,383,936 15,269,750,901 Hui Cheng QQ: 1172792005 Fax :0537 -2,359,798 
 First, the main technical parameters 
 Model ZBQ50 / 6 type 
 Basic parameters Parameter Name Units 
 Rated flow L / min 30, 50, 100 
 Rated working pressure Mpa 10,6,3 
 Plasma cylinder by mm 60,75,100 
 Stroke Length mm 120 
 Reciprocating frequency min-1 2-55 
 Supply pressure mpa 0.6 ~ 0.7 
 Adjust pressure mpa 0.05 ~ 0.6 
 Cylinder Diameter mm 250 
 Direct ventilation through G1 
 Compressed Air Consumption m3/min ≤ 0.7 
 Motor Power KW 
 Matching motor model 
 Weight KG 60 
 Dimensions (L × W × H) mm 1000 × 504 × 645 
 Slurry discharge port diameter (mm) 
 ZBQ-30 / 3 two-fluid pneumatic injection pump injection pump injection pump pneumatic air injection pump 
 ZBQ pneumatic injection pump is mainly used for mine, underground, water conservancy construction, grouting and broken rock consolidation project. Can also be used to adapt to face with the depth of pre-grouting. The pump can be used for single-grouting (cement), grouting can also be used to double (water, mud, water glass), can also be used to transport other viscosity or very large variety of corrosive slurry and water. But also in flammable, explosive, intense radiation, and more dust, temperature and watering sites can be great. 
 Second, characteristics: 
 1.ZBQ pneumatic injection pump 
 1) small size, light weight, handling, the move to adapt to frequent more grouting. 
 2) As a result of pressure transmission, the pump is ideal for grouting grouting performance requires a large flow of low pressure, and pressure grouting requires a small increase in traffic conditions. 
 3) The use of pneumatic transmission in flammable, high-explosive, water spray, dust, and large work environments can also be used. 
 4) in the slurry is not very stringent than required under the conditions of a pump can be used to achieve double-grouting, greatly reduce the acquisition cost of construction equipment. 
 Third, the principle 
 1, ZBQ air injection pump 
 Compressed air through the valve, air source second joint body, two five-way valve into the cylinder, the cylinder piston drive reciprocating movement. Plasma cylinder by cylinder rod and the rod connected to the cylinder piston reciprocating motion and also to promote the plasma cylinder reciprocating piston suction slurry to complete the action. For the rod installed in the cylinder on the dial, toggle back and forth trip valve, control for changing the cutting direction of the cylinder intake and exhaust, continuous complete cylinder piston reciprocating motion. 
 Fourth, the Order details 
 1, ZBQ pneumatic injection pump 
 1) use the model of the dual fluid injection pump grouting, the order stating the injection ratio of two-liquid slurry 
 2) The supply pressure must not be less than 0.6 ~ 0.7Mpa, the amount of not less than 0.7m3/min gas